JPSA Laser Applications Laboratory
JPSA maintains a laser applications lab and laser processing facilities to provide customers with the highest quality UV excimer and DPSS laser micro fabrication and microprocessing services. Our Manchester, NH lab focuses on high brightness (energy density on target), high precision, high throughput and a wide range of wavelengths, from the UV to near IR.
To see examples of our applications lab micromachining capabilities, see the Applications Gallery page.
JPSA offers customers the latest in a new generation of short wavelength laser processing equipment. Our team of experienced Ph.D. laser scientists and engineers specialize in high-quality, innovative products and services for advanced manufacturing. We help our customers prototype their parts, help them with process development, micromachine the production runs for them and build industrial high-precision UV laser systems to make the parts at their facilities, when production volume warrants.
Service Capabilities
| Maximum energy-density-on-target available (standard) |
Greater than 100 J/cm 2 (contact JPSA if higher fluence is required) | |
|---|---|---|
| Best lateral precision |
±1.5µm per 150mm of travel | |
| Wavelengths available | 1,064nm, 532nm, 355nm, 351nm, 308nm, 266nm, 248nm, 193nm, 157nm | |
| Maximum pattern dimensions |
300mm x 400mm | |
| Maximum part size |
Unlimited | |
| Minimum feature size |
Less than 1µm typical, material dependent | |
| Imaging, resolution | Binary optical microscope, 1,000x: 1µm digital camera 2,000x: less than 1µm SEM available |
|
| R&D and proof-of-concept |
Yes | |
| Prototypes and short-run preproduction |
Yes | |
| Volume production |
Yes | |
| Automated volume production for maximum economy |
Yes, optional tooling charges | |
| Optical damage testing |
Yes, all wavelengths including 157nm | |
| Applications and design consulting services |
Yes | |
| Ultra fast lasers |
Yes |
Our laboratory also operates pulsed and Q-switched Nd:YAG lasers in conjunction with highly capable automated systems to micro process a wide range of parts and materials to high tolerances.
For more information, contact JPSA.
News and Events
JPSA Laser provides excimer and Diode Pumped Solid State (DPSS) laser micromachining solutions for:
- Thin film PV patterning
- Laser scribing
- LED Lift-Off (LLO)
- Laser dicing
- Silicon edge isolation
- Ink-jet nozzles
- Microfluidic devices
- Micro vias
- Annealing and doping
- Parylene ablation
- Concentrator photovoltaics
See JPSA at:
Photonics West
Booth 5124
Moscone Center
San Francisco, CA
Jan 26-28
PHOTON‘s Photovoltaic Technology Show
Booth I-11
Moscone Center-West Hall
San Francisco, CA
February 2 - 4, 2010